Timer Instruction in Mitsubishi PLC (Different Interval Timers)

 

 

The timer counts up to the set value when the operation result up to the OUT instruction is ON and the coil of the timer/retentive timer specified by (d) turns ON. When the timer times up, NO contact becomes conductive and NC contact becomes non conductive.

 Values used for timers can be set in the range 1 to 32767. Actual timer constants are as follows since the OUT, OUTH, and OUTHS instructions operate as 100 ms, 10 ms, and 1 ms timers, respectively.
OUT instruction: 0.1 to 3276.7 seconds
OUTH instruction: 0.01 to 327.67 seconds
OUTHS instruction: 0.001 to 32.767 seconds